The Perfect Blend of Style and Durability
SPC flooring is engineered to deliver exceptional performance and aesthetics, making it ideal for both residential and commercial spaces. Our SPC (Stone Plastic Composite) flooring is the ultimate choice for modern interiors, combining cutting-edge technology with elegant designs.
At Halten International, we offer an extensive range of SPC flooring designs that suit every style and need
Why Choose SPC Flooring?
-
Ceramic bead Finish UV Coating
This top/surface layer of an SPC floor is designed to prevent discolouration, micro scratches and UV radiation -
WEAR LAYER (W/L)
It provides resistance to scratches and stains and is easy to keep clean. -
High Wooden Definition decor film
Regardless of natural wood or stone structure, Plankton SPC offers a variety of beautiful designs. that will better showcase your individual style and personality. -
Solid Polymer. Core board
This core is made from a combination of natural limestone powder and stabilizers, ensuring a stable and waterproof performance for the floor. -
IXPE Padding
Better sound absorption and excellent underfoot feeling
Technical Specification
| CHARACTERISTICS | STANDARDS | |||
|---|---|---|---|---|
| EN | Result | ASTM | Result | |
| Size | EN 427 | Pass | ASTM F536 | Pass |
| Overall Thickness | EN 428 | Pass | ASTM F36 | Pass |
| Wear Layer Thickness | EN 429 | Pass | ASTM F410 | Pass |
| Dimension Squareness and Straightness | EN 427 | Pass Squareness: 0.18mm Straightness: 0.07mm | ||
| Chemical Resistance | EN 423 | Pass | ASTM F925, ASTM F1344 | Pass |
| Colour Fastness to Artificial Light | EN20105:B02 Method A | Pass,≥Grade 6 | ASTM F1515 | Pass |
| Heat Stability by Color Change | ASTM F1514 | Pass | ||
| Castor Chair Suitability | EN 425 | Pass | ||
| Residual Indentation | EN 433 | Pass, 0.06mm | ASTM F1914, ASTM F970 | Pass |
| Abrasion Group | EN 660-1/2 | Group T | ASTM F510, ASTM D3384 | Pass |
| Impact Resistance | ASTM F1265, ASTM D2632 | Pass | ||
| Dimensional Stability | EN 434 | Pass | ASTM F2199 | Pass, 0.1% |
| Sound Reduction | ENIS0717-2 (▲Lw) | 2dB | ||
| Flexibility | EN 435 Method A | Pass | ASTM F137 | Pass |
| Slip Resistance | EN 13893 | Class DS | ASTMD2047-93 | Pass |
| Electrical Resistance | EN 1081 Method C | Pass | ASTM F150-06 | Pass |
| Thermal Resistance | EN 12664 | Pass | ||
| Toxic Element Test | EN 71-3 | Pass (Not toxic) Does not Contain heavy metal and formaldehyde | ||
| Behaviour to Fire | ENIS011925-2 EN13501-1 EN ISO 9239-1 | Bf1-S1 | ASTM E648-06 | Pass/Class1 |
| Smoke Density | ASTM E662 | Pass,<450 |
Installation Instructions
Our vinyl floorings are constructed with the patented Uniclic® tongue and groove design that locks the planks together to form a tight and durable joint that limits moisture from passing through the seams, can be installed over most floor surfaces, and suitable for both residential and light commercial interior applications. To assure satisfactory installation, please read all instructions before installing.
Prior To Installation
- Acclimate vinyl planks at least 48 hours to room temperature (60° 85°F) and relative humidity between 30% - 55%.
- Use humidifier to maintain relative humidity if needed. Avoid installation under very dry/ humid conditions, it is best to install when conditions are about the same as it will be most of the year.
- DO NOT stack higher than ten cartons and DO NOT stack anything on top of uninstalled vinyl planks. DO NOT store the cartons directly on concrete, allow for air circulation.
- Always carefully check flooring materials for any defects. Contact your supplier immediately if any defect is found.
- Open several cartons and mix planks together to ensure a natural pattern upon installation.
- Install all cabinets prior to installing flooring materials (DO NOT install on top of the floor).
- Remove all furniture from the room, as well as existing quarter round, baseboard molding or cove base.
- Inspect subfloor structure to be dry, clean, solid and flat. Any adhesive residue must be removed to ensure proper installation.
- Undercut doorway moldings to be the thickness of the flooring. Check that the doors can still open and close after the floor and underlayment are installed (minimum +1cm (3/8")).